Head Protection

1. Shell: made of high-density polyethylene (HDPE).
2. Harness: three nylon straps in an eight-point configuration, available in ratchet or pin-lock styles.
3. Available in vented and non-vented shell versions.
4. Vents on both sides of the crown aid airflow and heat dissipation for greater comfort. 
5. Head size can be adjusted quickly with one hand. 
6. Adjusts from 53 to 62cm, in increments as fine as 0.3cm. 
7. The headband adjustment follows the contour of the head for a comfortable fit. 
8. Colours: white, yellow, blue.
9. Printing: company name, logo, number, blood type and similar details can be added on request (printing charged separately).
10. Complies with CNS standards.

1. Shell: ABS or HDPE.

2.Harness: woven nylon straps, available with pin-lock or ratchet adjustment.

3. Colours: white, yellow, orange, blue, red.

4. Printing: company name, logo and number can be added (printing charged separately).

5. Complies with CNS standards.

1.Shell:ABSorHDPEmaterial.

2.Harness: six-point woven nylon straps, available with pin-lock or ratchet adjustment 。

3.Colours: white, yellow, orange, blue.

4.Printing: company name, logo and number can be added(printing charged separately)。

5.Complies withCNSstandards.

1.Shell:ABSorHDPEmaterial.

2.Harness: six-point woven nylon straps, available with pin-lock or ratchet adjustment 。

3.Colours: white, yellow, orange, blue.

4.Printing: company name, logo and number can be added(printing charged separately)。

5.Complies withCNSstandards.

1.Shell: polyethylene (PE).

2.For use where protection from minor bumps is required; an elastic chin strap is supplied as standard.

3.A bump cap is not a substitute for an industrial safety helmet.

4.Colours: white, yellow, orange, blue, red.

5.Printing: company name, logo, number and similar details can be added (printing charged separately).

6.This product has not beenCNS certified — please note.

1. Material: six-panel stitched non-woven fabric.

2. Thickness: 0.5mm.

3. Width: 64cm.

4. Height: 12cm.

* Fits all safety helmets

1. Shell: made of polyethylene (PE).

2. Nylon harness. 

3. Test voltage 20,000V, working voltage 7,000V, impact resistance 50 joules. 

4. Printing: company name, logo, number, blood type and similar details can be added (printing charged separately).